Payment & Shipping Terms:
|Solar Panel:||5.5V 0.75w Polysilicon||Battery:||3.7v 2200mAh Lithium Battery|
|Light Source:||2835 Led 16pcs||Light Source Power:||1W|
|Charging Time:||8 Hours||Working Time:||More Than 12 Hours|
|Plastic Material:||ABS + PC||Switch:||Automatic|
|Induction Mode:||PIR Sensor + Light Sensor||Sensing Distance:||3-5m|
Solar Power Rechargeable Led Wall Light With PIR Motion Sensor 8 / 16 LEDs Auto Control
SOLAR POWERED:this 4, 6, 8, 10, 12, 16 LEDs motion sensor wall light just need sunlight to work .it can last for 12hours working time from 8 hours of fully charging during the day.It is green and very friendly to the environment.
HIGH EFFICIENCY and QUICK RESPONSE: It use the third-generation solar panel to improve the solar energy conversion rate. The light has more sensitive motion sensors. so it can give a quick response to people near it.
BRIGHTER and MUCH SOFTER:the light can lighting for a wide area and give strong illumination, built-in High-storage batteries battery. For using the new material we call "Milky White PC Front Cove",the light works well to help spread the light more evenly from the LED lights, and give much softer and comfortable lighting, creating smoother, desirable Spot-free lighting effect.
3 Energy-saving Modes: you can set the modes to get the three diffident effect.Auto off at day and on at night; dim to bright when motion detected; auto light up when motion detected, sensing range of 10-26 feet with a 130 degree sensing angle.
IP65 WATERPROOF and HEATPROOF: with good material and high-precise assembling,the LED light has better waterproof function .so you can use them in many places such as wall, patio, garden, porch, lawn, pathway, stairway, driveway, etc. It can withstand rain and other extreme weather conditions.
|Model number||MS-6801 6161|
|Solar panel||5.5V 100ma 0.49w polysilicon|
|Battery||3.7v 900mah lithium battery|
|Light source||SMD2835 * 8pcs/16pcs|
|Operation mode||ON/OFF lighting control and human induction control|
|Color box size||130*96*52MM|
|net weight/gross weight:14.4/16kg|
1. Motion Sensor Mode
When people coming near the light will turn on for 30 seconds,when people leave,the lamp will switch off automatically
1.Motion Sensor + Dim Mode
When people coming near the light will turn to full power for 30seconds,when people leave,the lamp will turn to energy save mode
1. Solar panel: 0.55W, 17% efficiency
2. Li-ion battery: 3.7V 600mAh
3. Switch inside for saving power during shipment
4. LED: 1W,
5. Lumens: 100lm
6. LED span life: 50,000 hrs
7. Solar charging time: 8 hrs
8. Lighting mode: Dark/DIM/bright, DIM: weak lighting for saving power;
Bright: motion activate for lighting
9. Auto identify day or night
10.Protect function: over charging, over discharging, over current, short circuit
11. Li-ion battery span life: 500 circles
12. Solar panel span life: more than 5 years
This solar powered stair Light, in a modern technology, needs no mains power lead required,
the luminaire turns on automatically at night and turns out automatically in the morning.
Setting up and installation:
a. Press the on/off button, keep the light "on"model.
b. Drill two holes of 7mm diameter into the stair.These two holes is 76mm horizontal
distance. Then put the provided plastic stopple plug into the holes and screw in the
bolts so far into the wall that the bolt head sticks out about 5~8mm.
c. Hang-up the solar stair lights onto the screws(2pcs) and make sure it is stable.
Notes: Please put the light under the standard sunlights 6 to 8 hours before use
it,and tear the protective film when you use it.
Entrance of the door
Fence of house
Standard neutral export packaging, or OEM, customized according to customer requirements
Contact Person: Bruce
Tel: +86 15102709251